Super easy installation. Everything bolts together easily to get you out moving snow. Seems to be built heavy enough to push the snow a UTV is capable of moving.

I’ve had this plow for 2 winters now it moves snow great and it moves dirt and forest duff (needles leaves loose wood) like a champ. It’s worth it’s weight in gold.

I have a 2018 Polaris XP Turbo with the OEM Front Bumper. *If you don't have the OEM Bumper, this will not be an issue. The assembly of the plow frame and blade were straight forward. The problem I encountered was when installing the Plow Mount to the chassis. To install the mount you first have to remove the bumper and if you don't know Polaris, they use expansion hardware (bolts and nuts) similar to wall anchors to attach the bumper. To be able to install the mount Ithen had to use a wafer cut off to remove the piece off anchor that sticks out about a 1/4 '' and I could then install the mount to the chassis using the supplied hardware from Tusk. The only problem is that the supplied Front Nut Plate only has nuts welded in the position for use without a OEM bumper and once its in plate it blocks the holes for the bumper bolts.
In the assembly instructions they show a bumper bolted on against the Plow Mount but again, the Polaris expansion hardware has to be removed and trying to get nuts in position inside the chassis is almost impossible. I would like to have the bumper in place but will leave it off till removing the plow mount for summer. *** If Tusk would have just welded to more nuts on the Front Nut Plate where the OEM bumper bolts go through it would have been a fairly easy install.